Used farm machinery in Chelmsford for sale

24' diameter x 8' wide. Fitted with good bearings and wheel scrapers.

Fitted with front levelling boards. A high spec cultivator fitted with a swivel eye hitch, hydraulic jackstand, twin depth wheels on wings, hydraulic front levelling paddles, 45 sprung tines at 190mm spacing, hyd...

C/w scraper bar. 460mm dia, getting worn but still usable.

To fit Amazone AD-P Combi Drill Will need a few new tyres and some of the scrapers sorting.

C/w depth adjusters. Removed from CTS Stubble Finisher but could be modified to suit other machinery. 540/55-16 tyres.

400mm diameter. For repair or conversion to 3m. One section has worn through in a couple of places - either wants repairing or cutting out to convert to a 3m packer.

Sprung swingarms.

In good condition. 460mm Dia.

New unused tyres Hub Fitment - Center bore: 161mm, PCD: 6x205mm, Stud size: 20mm Countersunk 1 tyre has a bit of a cut in the tread as shown in the photos however this is not deep and the tyre is sound.

Fitted on fixed center rim. Tyre has 99% tread remaining and is sound however has deep scratching on one side. Hub fitment. Center Bore: 140mm, PCD: 8 x 205mm, Stud size: 32mm

New and unused. Will fit most 8 stud trailer axles – please check hub fitment below. Hub fitment – Center Bore: 221mm, PCD: 8 x 275mm, Stud Size: 22mm countersunk.

Fitted with unused Alliance A 380 tyres. 169A8 speed rating - steel belted radial. Designed for wheeled excavators, dumpers, small loaders and heavy agricultural implements like rolls, trailed subsoilers etc. Hub...

Unused tyres on rims. 16 ply rating. Hub Fitment: Center Bore: 281mm, PCD: 10 x 335mm, Stud size: 27mm

New and unused. Hub fitment - Center Bore: 281mm, PCD: 10x335mm, Stud Size: 27mm

New and unused. Will fit most 8 stud trailer axles - please check hub fitment below. Hub fitment - Center Bore: 221mm, PCD: 8 x 275mm, Stud Size: 22mm countersunk.

Disc - tine - disc configuration. Fitted with Pro-Active angle adjustable discs, 12 sprung ST tines and rear DDL packer.  Fitted with hydraulic brakes and rear drawbar. A good frame but needs attention before go...

Brand new and unused, this is a well put together flail. It has hydraulic offset, rear roller, hammer flails and removable grass rakes. 2m working width. We can also supply 1.8m working width. We don't hold stock...

In excellent condition! Fitted with 5 subsoiling legs with shearbolt protection, 2 rows of sprung angle adjustable discs and rear DD packer. Fitted with new points, shins and wings and in good order throughout. ...

C/w depth wheels Good strong frame. Depth wheel adjusters need freeing off and one is missing a handle. 4m transport width. Serial no: 1328

C/w depth wheels and crumbler roller Also has extra leg brackets to enable using it as a 4 leg machine.